Description & Specifications
04B roller chain is a metric roller chain size that is manufactured to ISO606, BS228, DIN 8187 standards. Our 04B metric roller chain uses high quality carbon steel components that are heat treated and shot peened. Nitro #04B chain is a quality product that is manufactured to exceed industry standards.

04B Roller Chain Dimensions
- Pitch (P):6.00mm
- Inner Width (b1):2.80mm
- Roller Diameter (d1):4.00mm
- Overall Width (L):6.80mm
- Pin Diameter (d2):1.85mm
- Link Plate Height (h2):5.00m
- Link Plate Thickness (T):0.60mm
- Average Tensile Strength:719 lbs
- No. Of Pitches/Links Per 10 Feet:508
- No. Of Connecting Links Included:1
- Industry Standard:ISO 606, DIN 8187, BS 228
All dimensions listed are nominal values.
Features
Solid Roller
Manufactured with solid cold-forged rollers for smoother contact with the sprocket teeth and to resist distorting under heavy loads.
Pre-Loaded
After assembly, all Nitro chains are pre-loaded to a minimum load required by the industry standard. Pre-loading seats the chain joint that eliminates any initial elongation in a new chain.
Lubrication
Pre-lubricated in a special formulated lubricant through a hot-dipping process. This process is critical to ensure the lubricant penetrates and thoroughly coats the internals of the chain. The special lubricant offers better retention (less spin-out) and improved wear protection over chains that are cold-dipped.
Heat Treated
Advanced heat treatment is applied to achieve optimum hardness for strength and wear resistance.
Shot Peened
To combat fatigue failure from repetitive loads & wear, a compressive stress layer is added through shot peening.
Product Care & Maintenance
Maintenance and lubrication is crucial in the overall performance and life span of roller chain. Proper lubrication will reduce abrasion, chain wear, friction, noise and keep chains running cooler at higher RPM's. You can download the Nitro Roller Chain Care below.