Description & Specifications
12B roller chain is a metric size that is manufactured to ISO606, BS228, DIN 8187 standards. Our 12B metric roller chain uses high quality carbon steel components that are heat treated and shot peened for increased durability.
12B Roller Chain Dimensions
- Pitch (P):19.05mm
- Inner Width (b1):11.68mm
- Roller Diameter (d1):12.07mm
- Overall Width (L):22.50mm
- Pin Diameter (d2):5.72mm
- Link Plate Height (h2):16.00mm
- Link Plate Thickness (T):1.88mm
- Average Tensile Strength:7,496 lbs
- Max Working Load:1,190 lbs
- No. Of Pitches/Links Per 10 Feet:160
- No. Of Connecting Links Included:5
- Industry Standard:ISO 606, DIN 8187, BS 228
- Chain Generation:N2
Manufactured with solid cold-forged rollers for smoother contact with the sprocket teeth and to resist distorting under heavy loads.
Built with solid cold-forged bushings for superior wear resistance that results in service life 2x to 3x greater than split bushing chains. See the solid bushing advantage.
After assembly, all Nitro chains are pre-loaded to a minimum load required by the industry standard. Pre-loading seats the chain joint that eliminates any initial elongation in a new chain.
Pre-lubricated in a special formulated lubricant through a hot-dipping process. This process is critical to ensure the lubricant penetrates and thoroughly coats the internals of the chain. The special lubricant offers better retention (less spin-out) and improved wear protection over chains that are cold-dipped.
Advanced heat treatment is applied to achieve optimum hardness for strength and wear resistance.
To combat fatigue failure from repetitive loads & wear, a compressive stress layer is added through shot peening.
Product Care & Maintenance
Maintenance and lubrication is crucial in the overall performance and life span of roller chain. Proper lubrication will reduce abrasion, chain wear, friction, noise and keep chains running cooler at higher RPM's. You can download the Nitro Roller Chain Care below.
Tools, Accessories & Related Products