The #12B SK1 attachments will fit any British Standard 12B roller chain. The SK1 attachment has 1 straight tab with a single hole.
12B SK1 Attachment Connecting Link Dimensions
Pin Diameter (d2):5.72mm
Link Plate Thickness (T):1.85mm
Tab Width (G):16mm
Height To Hole (C):21.45mm
Height To Tab Top (F):28.60mm
Attachment Hole Diameter (d4):6.4mm
Connecting Link Clip Type:Spring Clip
Industry Standard:ISO 606, DIN 8187, BS 228
All dimensions listed are nominal values.
Connecting Link Installation Tips
Spring Clip Connecting Links: The spring clip should be installed where the opening is facing away from the direction of travel. This will help prevent the spring clips from coming off. Like shown in the diagram to the right. Careful not spread the clip opening too far apart. This can make the clip more prone to falling off.
Cotter Pin Connecting Links: Cotter Pin Connecting Links The cotter pins pin legs should be spread about 60° apart. Like shown in the diagram to the left. Never reuse cotter pins that have been taken off. Never use commercial cotter pins as these are usually not hardened.