Description & Specifications
The #16B SK1 attachments will fit any British Standard 16B roller chain. The SK1 attachment has 1 straight tab with a single hole.
16B SK1 Attachment Connecting Link Dimensions
- Pitch (P):25.40mm
- Pin Diameter (d2):8.28mm
- Link Plate Thickness (T):3.10mm
- Tab Width (G):19.1mm
- Height To Hole (C):23.15mm
- Height To Tab Top (F):34.00mm
- Attachment Hole Diameter (d4):6.4mm
- Connecting Link Clip Type:Spring Clip
- Industry Standard:ISO 606, DIN 8187, BS 228
All dimensions listed are nominal values.
Installation
Connecting Link Installation Tips
Spring Clip Connecting Links:
The spring clip should be installed where the opening is facing away from the direction of travel. This will help prevent the spring clips from coming off. Like shown in the diagram to the right.
Careful not spread the clip opening too far apart. This can make the clip more prone to falling off.
Cotter Pin Connecting Links:
Cotter Pin Connecting Links The cotter pins pin legs should be spread about 60° apart. Like shown in the diagram to the left.
Never reuse cotter pins that have been taken off. Never use commercial cotter pins as these are usually not hardened.
Related Items
$4.34
$5.27
$7.07
$8.21