25 roller chain is a miniature industrial roller chain that's made to ANSI B29.1 standards. #25 chain is commonly referred to as a "1/4 pitch roller chain". All 50ft lengths of Nitro roller chain is stocked on a reel for easy handling and storage.
Inner Width (b1):1/8''
Roller Diameter (d1):0.130''
Overall Width (L):0.311''
Pin Diameter (d2):0.091''
Link Plate Height (h2):0.228''
Link Plate Thickness (T):0.030''
Average Tensile Strength:992 lbs
Max Working Load:143 lbs
No. Of Pitches/Links Per 10 Feet:480
No. Of Connecting Links Included:5
Chain Material:Carbon/Alloy Steel
ANSI Chain Size:25-1
² Rollerless chain. d1 = bushing diameter
Manufactured with solid cold-forged rollers for smoother contact with the sprocket teeth and to resist distorting under heavy loads.
After assembly, all Nitro chains are pre-loaded to a minimum load required by the industry standard. Pre-loading seats the chain joint that eliminates any initial elongation in a new chain.
Pre-lubricated in a special formulated lubricant through a hot-dipping process. This process is critical to ensure the lubricant penetrates and thoroughly coats the internals of the chain. The special lubricant offers better retention (less spin-out) and improved wear protection over chains that are cold-dipped.
Advanced heat treatment is applied to achieve optimum hardness for strength and wear resistance.
To combat fatigue failure from repetitive loads & wear, a compressive stress layer is added through shot peening.
Product Care & Maintenance
Maintenance and lubrication is crucial in the overall performance and life span of roller chain. Proper lubrication will reduce abrasion, chain wear, friction, noise and keep chains running cooler at higher RPM's. You can download the Nitro Roller Chain Care below.