Description & Specifications
#35ZP Zinc plated connecting link. Roller chain connecting links also known as master links are used to connect two ends of the roller chain together.
Pitch (P): 3/8"
Overall Width: (L): 0.514
Pin Diameter (d2): 0.141
Link Plate Height (h2): 0.308
Link Plate Thickness (T): 0.050
-
Heat Treated For Maximum Hardness
-
Shot Peening For Longer Fatigue Resistance
-
Pre Strechted to Minimize Elongation Overtime
-
Meets ANSI Specifications
Installation
Connecting Link Installation Tips
Spring Clip Connecting Links:
The spring clip should be installed where the opening is facing away from the direction of travel. This will help prevent the spring clips from coming off. Like shown in the diagram to the right.
Careful not spread the clip opening too far apart. This can make the clip more prone to falling off.
Cotter Pin Connecting Links:
Cotter Pin Connecting Links The cotter pins pin legs should be spread about 60° apart. Like shown in the diagram to the left.
Never reuse cotter pins that have been taken off. Never use commercial cotter pins as these are usually not hardened.
Related Items
$0.29
Item ID: CL40ZP
Availability:
415 In Stock
$0.36
Item ID: CL41ZP
Availability:
389 In Stock
$0.51
Item ID: CL50ZP
Availability:
475 In Stock
$0.64
Item ID: CL60ZP
Availability:
487 In Stock
$1.46
Item ID: CL80ZP
Availability:
493 In Stock