The A2060 roller chain has a double pitch of an ANSI standard chain. A2060 chain is commonly referred to as "extended pitch chain". Our A2060 extended pitch roller chain is made from high quality carbon steel that is heat treated and shot peened for strength and durability.
A2060 Roller Chain Dimensions
Inner Width (b1):1/2''
Roller Diameter (d1):0.469''
Overall Width (L):1.020''
Pin Diameter (d2):0.234''
Link Plate Height (h2):0.709''
Link Plate Thickness (T):0.094''
Average Tensile Strength:9,700 lbs
Max Working Load:1,367 lbs
No. Of Pitches/Links Per 10 Feet:80
No. Of Connecting Links Included:1
Industry Standard:ANSI B29.1
Manufactured with solid cold-forged rollers for smoother contact with the sprocket teeth and to resist distorting under heavy loads.
Built with solid cold-forged bushings for superior wear resistance that results in service life 2x to 3x greater than split bushing chains. See the solid bushing advantage.
After assembly, all Nitro chains are pre-loaded to a minimum load required by the industry standard. Pre-loading seats the chain joint that eliminates any initial elongation in a new chain.
Pre-lubricated in a special formulated lubricant through a hot-dipping process. This process is critical to ensure the lubricant penetrates and thoroughly coats the internals of the chain. The special lubricant offers better retention (less spin-out) and improved wear protection over chains that are cold-dipped.
Advanced heat treatment is applied to achieve optimum hardness for strength and wear resistance.
To combat fatigue failure from repetitive loads & wear, a compressive stress layer is added through shot peening.
Product Care & Maintenance
Maintenance and lubrication is crucial in the overall performance and life span of roller chain. Proper lubrication will reduce abrasion, chain wear, friction, noise and keep chains running cooler at higher RPM's. You can download the Nitro Roller Chain Care below.