Description & Specifications
C2080H K1-EL Roller Chain Dimensions
- Pitch (P):2''
- Inner Width (b1):5/8''
- Roller Diameter (d1):0.625''
- Pin Diameter (d2):0.312''
- Link Plate Height (h2):0.949''
- Link Plate Thickness (T):0.156''
- Tab Width (G):1.500''
- Centerline To Outer Attachment Width (W):1.602''
- Width To Center Hole (F):1.438''
- Attachment Hole Diameter (d4):0.264''
- Attachment Height (h4):0.750''
- Attachment Spacing (S):2.000''
- Average Tensile Strength:17,196 lbs
- Max Working Load:2,403 lbs
- No. Of Pitches/Links Per 10 Feet:60
- No. Of Connecting Links Included:1
- Chain Material:Carbon/Alloy Steel
- Industry Standard:ANSI B29.4
- Chain Generation:N2
All dimensions listed are nominal values.
Manufactured with solid cold-forged rollers for smoother contact with the sprocket teeth and to resist distorting under heavy loads.
Built with solid cold-forged bushings for superior wear resistance that results in service life 2x to 3x greater than split bushing chains. See the solid bushing advantage.
After assembly, all Nitro chains are pre-loaded to a minimum load required by the industry standard. Pre-loading seats the chain joint that eliminates any initial elongation in a new chain.
Pre-lubricated in a special formulated lubricant through a hot-dipping process. This process is critical to ensure the lubricant penetrates and thoroughly coats the internals of the chain. The special lubricant offers better retention (less spin-out) and improved wear protection over chains that are cold-dipped.
Advanced heat treatment is applied to achieve optimum hardness for strength and wear resistance.
To combat fatigue failure from repetitive loads & wear, a compressive stress layer is added through shot peening.