Description & Specifications
This stainless steel SK1 attachment connecting links fits any standard #C2050SS conveyor roller chains. C2050SS SK1 stainless attachments are perfect for applications where you need to attach cross bars or bolt custom components to the chain.
C2050SS SK1 Attachment Connecting Link Dimensions
- Pitch (P):1-1/4"
- Overall Width (L):0.815''
- Pin Diameter (d2):0.200''
- Link Plate Thickness (T):0.080''
- Tab Width (G):0.937"
- Height To Hole (C):0.563"
- Height To Tab Top (F):0.984"
- Attachment Hole Diameter (d4):0.259"
- Connecting Link Clip Type:Connecting Link
- Chain Material:#304 Stainless
Connecting Link Installation Tips
Spring Clip Connecting Links:
The spring clip should be installed where the opening is facing away from the direction of travel. This will help prevent the spring clips from coming off. Like shown in the diagram to the right.
Careful not spread the clip opening too far apart. This can make the clip more prone to falling off.
Cotter Pin Connecting Links:
Cotter Pin Connecting Links The cotter pins pin legs should be spread about 60° apart. Like shown in the diagram to the left.
Never reuse cotter pins that have been taken off. Never use commercial cotter pins as these are usually not hardened.
SK1 Attachment Link Interchange
Different chain companies may use different identifications for attachments. Below is a quick reference chart for attachment link interchangeability to the Nitro™ attachments.